The premium, user-friendly thermostatic bath shower mixer tap VICO from SCHÜTTE is a perfect choice for every bathroom.
The bathroom mixer tap is distinguished by a replaceable thermostat element and temperature scale with child-protection at 38 °C. Thanks to its chrome-plated surface, this mixer tap has a reflective sheen. Moreover, the solid brass construction makes the bathroom tap highly durable.
The mixer tap is easy to install and clean.
- Colour: Chrome
- Material: Brass
- Finish: Chrome plated
- Dimensions: 25.2 x 7.2 x 3 cm (L x W x H)
- Replaceable thermostat element
- ½" (diameter approx. 1.9 cm) ceramic valve bonnets and shower hose connection
- Temperature scale with child-protection at 38 °C
Safety notes . Only allow experts carry out the installation work. . CAUTION DAMAGE BY WATER! Prior to installation please turn the general water supply off. . Ensure that all gaskets have the correct fit. . These taps are not suitable for use on low pressure and small electrical storage heaters. . We recommend the installation of a filter into the appliance or at least the use of angle valves with filter, in order to avoid the inflow of foreign matter, which could damage the upper parts of the valves. . This tap is only intended for use in private households! Only suitable for use in rooms with a temperature over 0°C, when there is danger of frost, sut off the water supply and empty the tap. . If the tap not used for a longer period, we recommend to initially let a larger quantity of water flow through before withdrawing drinking water. · Take care when adjusting the warm water. Danger of scalding! . Incorrectly installed fittings can cause water damages! · Despite careful production, sharp edges can occur. Please exercise caution!Disposal Your washbasin tap is delivered in a solid pa- ckaging, in order to protect it against transport damages. The packaging consists of recyclable materials. Dispose it in an environmentally suitable manner. Do not throw the product into the normal domestic waste at the end of its service life, but ask your municipal administration about the possibility of an environmentally friendly disposal. Technical data . Flow pressure: recommended 1.5 bar; install a pressure reducer at more than 6 bar . Water temperature: max. 80 ℃ · Water connection: warm - left / cold - rightA Installation Instructions . Shut off the water supply before beginning installation · After installation unscrew the mixer nozzle, flush the pipeline and the tap very well (warm/cold water supply), in order to flush out contaminations (swarf and hemp remain- ders). After flushing, screw the mixing nozzle onto the spout again. . We do not assume any warranty for in correct installation - in particular for subsequent damages! . Check all connections carefully after first-time use to make sure that they are tight.Instructions for care Sanitary taps require special care. Therefore, please observe the following instructions: · Chrome-plated surfaces are sensitive to lime- dissolving agents, acidic cleaning agents and all kinds of abrasives. . Never clean coloured surfaces with abrasive, corrosive, or alcoholic agents. . Only clean your taps with clear water and a soft cloth or a shammy. Surface damage is to be expected, if the care instructions are not observed. This makes any warranty claims invalid. Do not forget to unscrew the mixing nozzle in regular intervals and to remove possibly calcareous residues or foreign matter. It is advisable to replace the mixing nozzle with a new one in the case of extreme contamination.Maintenance . Please note that a valve top is a wearing part and that in the case of very hard or soiled water the valve must be replaced every 1 to 2 years, as required. Please purchase spare parts from your local retailer. . Please check all joints and connections for leaks or visible damages at regular intervals. . In case of any leaks or visible damages to the fitting or connection hoses, these should be immediately checked by a specialist and replaced if necessary. Decommissioning . Cut off the water supply before dismantling the product. . Pay attention to escaping residual water. . Disassemble the product in the reverse order of the assembly instructions.1 The illustrations are to be considered as figurative representations, deviations of the product are possible. Subject to technical modifications. GUARANTEE CARD The Franz Joseph Schütte GmbH grants a manufacturer guarantee for the tap you have acquired according to the following guarantee conditions. This guarantee does not limit your warranty claims resulting from the sales con- tract with the vendor as well as your statutory rights. Guarantee conditions: 1. Scope of the guarantee The Franz Joseph Schütte GmbH guarantees for perfect, material condition and processing suitable for the intended purpose, professional assembly, leaktightness, and function. The guarantee does not cover: . Corrosion in the mixing nozzles (aerator) · Valves · Damage by inappropriate installation, start- up and handling · Damage by outside effects, such as fire, water, abnormal environmental conditions. Mechanical damage by accident, fall, impact . Negligent or intentional destruction . Normal wear or malfunctions due to lack of maintenance . Damages due to repairs by non-qualified persons . Inappropriate handling, insufficient care as well as the use of unsuitable cleaning agents . Chemical or mechanical effects during trans- port, storage, connection, repair and use of the tap.2. Guarantee The guarantee covers at our discretion free re- pair, delivery of spare parts free of charge or of an equivalent tap against return of the faulty part and/or faulty tap. If the model concerned should not be manufactured any longer, we reserve the right to supply a replacement tap from our product range at our discretion, which complies to the returned model as far as possible. Replaced taps or parts there of become our property. The buyer bears the transport costs as well as the transport risk, if a tap is returned. Refunding of expenditures for disassembly and assembly, examination, claims for loss of profit and compensation are likewise excluded from the guarantee, as well as all further claims for damages and losses, which are caused by the tap or its use. 3. Asserting of the warranty claim The warranty claim must be asserted within the guarantee period in regard to the Franz Joseph Schütte GmbH by submitting the origi- nal sales slip and only applies to the country, in which the tap was bought.4. Guarantee period The valid guarantee period is indicated on the packaging label. If no guarantee period is imprinted there, then a guarantee period of 2 years applies starting from purchase date. The date on the original sales slip is decisive. For all not high-gloss chrome-plated surfaces, e.g. bronzed or coloured surfaces, the guaran- tee period is 1 year irrespective of the label on the packaging starting from purchase as spe- cified by the purchase date, whereby the date on the original sales slip is also relevant here. The guarantee period for the tap is neither extended nor renewed by guarantee perfor- mances.5. This guarantee is governed by German law under exclusion of the United Nations Conven- tion on Contracts for the International Sale of Goods (CISG). This guarantee card is only valid with the pertinent original sales slip.
