stradeXL Self-centering Wood Chuck Set for 3.75 Inch Steel

£122.92
  • Colour: Red and black
  • Material: Steel
  • Number of jaws: 4
  • Self-centering
  • Chuck diameter: 95 mm (3.75 inch)
  • Carrying case dimensions: 30.5 x 22.5 x 7.5 cm (L x W x H)
  • Inside grip diameter range:
  • , 1 Step jaws: 2.5 mm - 35 mm
  • , 2 Round jaws: 32 mm - 64 mm
  • , 3 Round jaws: 76 - 108 mm
  • , 4 Pin jaws: 9.5 mm - 45 mm
  • , 5 Flat jaws: 73 mm
  • Outside grip diameter range:
  • , 1 Step jaws (Lower step): 38 mm - 73 mm
  • , 1 Step jaws (Upper step): 19 mm - 51 mm
  • , 2 Round jaws: 45 mm - 80 mm
  • , 3 Round jaws: 90 mm - 124 mm
  • , 4 Pin jaws: 25 mm - 60 mm
  • , 5 Flat jaws: 130 mm
  • Indexed backplate: 24 and 36 positions
  • Thread: 1" x 8TPI
  • Maximum speed: 3000 R/min
  • Net weight: 4.5 kg
  • Can hold round and square stock
  • Assembly required: Yes
  • Delivery contains:
  • 1 x Chuck body
  • 1 x Carrying case
  • 1 x T-handle hex wrench 4mm
  • 1 x Lathe chuck key 8 mm
  • 1x Woodworm screw
  • 1 x Hex wrench
  • 4 x , 1 Step jaw
  • 4 x , 2 Round jaw
  • 4 x , 3 Round jaw
  • 4 x , 4 Pin jaw
  • 8 x Flat head cap screw M5-.8x8
  • 8 x Grip studs 13 mm, M6-1x6
  • 8 x Grip studs 18 mm, M6-1x6
Quantity

This wood chuck set for 95 mm (3.75 inches) is a mechanical device used to clamp a workpiece on a machine tool. Made of steel, the set is durable and sturdy. As a machine tool accessory, it uses the radial movement of movable jaws evenly distributed on the chuck to clamp and position the workpiece. This wood lathe chuck set includes a 4 jaw self-centering chuck and interchangeable jaws for spindles, bowls, and work-pieces that are hard to be secured. The set will fit 1" x 8 TPI spindle.

  • Colour: Red and black
  • Material: Steel
  • Number of jaws: 4
  • Self-centering
  • Chuck diameter: 95 mm (3.75 inch)
  • Carrying case dimensions: 30.5 x 22.5 x 7.5 cm (L x W x H)
  • Inside grip diameter range:
  • , 1 Step jaws: 2.5 mm - 35 mm
  • , 2 Round jaws: 32 mm - 64 mm
  • , 3 Round jaws: 76 - 108 mm
  • , 4 Pin jaws: 9.5 mm - 45 mm
  • , 5 Flat jaws: 73 mm
  • Outside grip diameter range:
  • , 1 Step jaws (Lower step): 38 mm - 73 mm
  • , 1 Step jaws (Upper step): 19 mm - 51 mm
  • , 2 Round jaws: 45 mm - 80 mm
  • , 3 Round jaws: 90 mm - 124 mm
  • , 4 Pin jaws: 25 mm - 60 mm
  • , 5 Flat jaws: 130 mm
  • Indexed backplate: 24 and 36 positions
  • Thread: 1" x 8TPI
  • Maximum speed: 3000 R/min
  • Net weight: 4.5 kg
  • Can hold round and square stock
  • Assembly required: Yes
  • Delivery contains:
  • 1 x Chuck body
  • 1 x Carrying case
  • 1 x T-handle hex wrench 4mm
  • 1 x Lathe chuck key 8 mm
  • 1x Woodworm screw
  • 1 x Hex wrench
  • 4 x , 1 Step jaw
  • 4 x , 2 Round jaw
  • 4 x , 3 Round jaw
  • 4 x , 4 Pin jaw
  • 8 x Flat head cap screw M5-.8x8
  • 8 x Grip studs 13 mm, M6-1x6
  • 8 x Grip studs 18 mm, M6-1x6
147834

6 other products in the same category